ABOUT NOEDING VIETNAM:
Five decades Nöding Meßtechnik 1958 - 2019
The company was founded in 1958 by Mr. Gustav Noeding and focussed initially on commercializing revolution counters and gauges with electrical contacts. In-house design and production of temperature instruments and controllers, transmitters, and isolation amplifiers were introduced as a natural development of the company.
In 1987 Ralf Noeding took over from his father and the company was converted into Noeding Messtechnik GmbH, a limited liability company.
The markets showed in the last decades an ever-increasing requirement for pressure measurement. As a logical consequence, Noeding Messtechnik specialized in the design and production of pressure transmitters. In 2001 the company relocated to a new facility, where today substantial quantities of transmitters are being produced for OEMs, end users, retailers, etc..
TYPICAL PRODUCTS NOEDING VIETNAM:
1. PRESSURE TRANSMITTER NOEDING:
Safety note:
The pressure transmitter is designed for measuring absolute and gauge pressure of gases, vapors, and liquids. If used incorrectly, application-related dangers may arise. The transmitter must be installed, connected, commissioned, operated, and maintained only by qualified and authorized personnel and under strict observance of these operating instructions, relevant national standards, legal requirements, and where appropriate, the product certification.
Installation:
The function of the transmitter is nearly independent of its orientation. To protect the process connection and pressure diaphragm from damage, remove the protective cap just before installation. The pressure transmitter must be installed in accordance with applicable national guidelines for pressure components. We recommend the use of isolating valves, siphons, etc... During installation, ensure that no water enters the housing.
2. DIGITAL PRESSURE GAUGE:
Safety notes:
The digital contact pressure gauge is designed for measuring absolute and gauge pressure of gases, vapors, and liquids. If used incorrectly, application-related dangers may arise. The transmitter must be installed, connected, commissioned, operated, and maintained only by qualified and authorized personnel and under strict observance of these operating instructions, relevant national standards, legal requirements, and where appropriate, the product certification.
Installation:
The function of the transmitter is nearly independent of its orientation. To protect the process connection and pressure diaphragm from damage, remove the protective cap just before installation. The pressure transmitter must be installed in accordance with applicable national guidelines for pressure components. During installation, ensure that no water enters the housing.
Việt Thành Thiên đại lý chính thức hãng Noeding Vietnam – Đại lý hãng Noeding tại Vietnam
Liên hệ ngay để nhận báo giá mới nhất về sản phẩm Nodeding tại vietnam
Xem thêm về Việt Thành Thiên – Đại lý chính thức hãng Noeding tại vietnam
| DIGITAL CONTACT GAUGE PM | |
| Nöding Meßtechnik GmbH | |
| Model: PM82-0110-330 | |
| 3- digit 14mm LED display | |
| 1 contact output DC PNP | |
| M12 plug 5 pins | |
| dry ceramic sensor AL2O3 + Viton seal | |
| 80 mm stainless steel bayonet lock case | |
| Pressure range: 0…10 bar gauge pressure | |
| Process connection: ½” Gas B | |
| Accuracy: +/- 0.5% f.s. | |
| Noeding Vietnam | Pressure Transmitter |
| P120.01-403-F3A | |
| Range 0…400 MPa with M12 Connector | |
| Noeding Vietnam | Pressure Transmitter |
| P120.01-401-F3A | |
| Range 0…160 MPa with M12 Connector | |
| Noeding Vietnam | P121-H04-334R |
| 0-0.6bar | |
| 4-20mA, 2 wire high temperature | |
| G 1/2A | |
| Noeding Vietnam | P131-410-F3AR |
| 10 bar | |
| Noeding Vietnam | Replaced by: P10-410-D110 |
| Range: 0…10 bar rel. | |
| Out: 4…20 mA 2-wire | |
| Viton gasket | |
| Mechanical Connection: G1/4A 1.4404 | |
| Electrical Connection: Connector EN 175301-803A | |
| Power supply: 9…30 V DC | |
| (Model: 26.600G-1002-R-1-5-100-400-1-000) | |
| Noeding Vietnam | Replaced by: P10-410-D160 |
| Range: 0…10 bar rel. | |
| Out: 4…20 mA 2-wire | |
| Viton gasket | |
| Mechanical Connection: G1/4A 1.4404 | |
| Electrical Connection: 2 m Cable connection | |
| Power supply: 9…30 V DC | |
| (Model: 26.600G-1002-R-1-5-100-400-1-000) | |
| Noeding Vietnam | Pressure transmitter |
| Model: P10-1F1-3-1-6-0 | |
| Noeding Vietnam | Replaced by: P21 4 09-Q160 |
| Output signal: 4...20 mA 2-wire. | |
| Range: 0...6 bar. | |
| Process connection and material: G ¾“ DIN 3852 1.4404 (316L). | |
| 2m cable IP 67 or 5m cable IP 67. | |
| (WIKA TRANSMITTER Type: S-10 | |
| 0-6 BAR | |
| OUTPUT:4~20ma | |
| Power:10~30VDC | |
| COUPLING 25) | |
| Noeding Vietnam | Converted by Noeding: P132410M10R |
| (Model: E93355B22R) | |
| Noeding Vietnam | Converted by Noeding: P132409M10R |
| (Model: E93318B20R 0410) | |
| Noeding Vietnam | Replaced by: P120.01-401-F3A (new Krones) |
| Range: 0…160 MPa rel. | |
| 99.9% Ceramic | |
| 4…20mA Out | |
| G1A 1.4404 | |
| EPDM Kautschuk | |
| New……..for M12 connector | |
| (Pressure sensor | |
| P120-401-F3K1 | |
| RB1 6201 | |
| RB-B103 | |
| 0…160mbar | |
| 4…20mA | |
| 9…32VDC | |
| MR: 812011714) | |
| Noeding Vietnam | Pressure transmitter |
| Model: P21-411-1160 | |
| Noeding Vietnam | Pressure Transmitter |
| P120.01-401-F3A | |
| Range 0…160 MPa with M12 Connector | |
| Noeding Vietnam | M12 Connector with 2m Cable |
| code no. AKG-12-5-2PVC | |
| Noeding Vietnam | Code: P10-417-D1A0 |
| Noeding Vietnam | Pressure Transmitter |
| Model: P10-4B5-D160 | |
| Noeding Vietnam | Digital Pressure gauge: P100-2150-310 |
| Output: 0…20 mA | |
| Range: 0…100 bar | |
| Process connection: G1/2” | |
| Gasket: FPM Viton | |
| Without Contact | |
| Noeding Vietnam | Converted into Noeding |
| Pressure Transmitter | |
| Code: P10-410-9(D)110 | |
| Range: 0…10 bar | |
| Out: 4…20 mA 2-wire | |
| Power supply: 9…30 V DC | |
| Process connection and Material: G ¼ A DIN 16288,1.4404 | |
| Noeding Vietnam | P121-410D21R |
| Noeding Vietnam | PM82-3210-310 |
| Noeding Vietnam | P132409M10R |
| Noeding Vietnam | P120.01- 401- F3A (0 - 160mBar) |
| Noeding Vietnam | P120.01- 401- F3A (0 - 400mBar) |
| Noeding Vietnam | P121-412-311 |
| Noeding Vietnam | P20 H 10 X1 6 |
| Noeding Vietnam | P120.01-403-F3A |
| Noeding Vietnam | 0..10 bar 4-20mA Max 200 mA; 24 VDC (19..30V) |
| Noeding Vietnam | PM82-0110-330 |
| Noeding Vietnam | P21-409-21H1 |
| Noeding Vietnam | P133-EW3-U050-01R |
| Noeding Vietnam | P1264C5-211R |
Kinetrol vietnam, Kinetrol chính hãng, Đại lý Kinetrol Actuator model 0M Kinetrol vietnam, Kinetrol chính hãng, Đại lý Kinetrol Actuator model 01 Kinetrol vietnam, Kinetrol chính hãng,...